Monthly Archives: June 2018

10 Common Reasons Why Printers Jam

Just like traffic jams, print devices jams can be similarly annoying. These kinds of jams occur when the paper going through the printer goes awry. When the problem occurs some printers may ignore this problem and opt to soldier on while others may stop mid whereby some part of the paper remains trapped inside the tray. Different printers handle these issues differently while others may scream at you others may offer you some good guidance on how to clear this mess.  Sometimes this jamming may not be the printer’s fault actually these jams can be preventable via proper use and complete maintenance of your printer.

Areas which are prone to jams in a printer include some of the following-

The input area, this mainly occurs to those print devices which have a feeder on top that takes the paper in to be scanned. The system draws multiple pages thus causing some jam in the feeder. Always fan your papers before feeding them into the feeder also ensure that your papers are loaded in a nice stack.

 

Throughput area, basically this is where the show goes down. This area is riddled with much electrostatic energy and heat which is used to fuse toner particles onto fast moving pieces of paper. This, in turn, produces a print or copy on a laser device.

Output area-although rare jams can still occur here in the finishing area.

Top 10 reasons which can cause paper jamming in your printing device include the following:

 

Damaged paper

Papers that have curled corners or have some bents can cause serious jams on your printing device.

Incorrect loading

Your printer guide and your paper size should be in total rhyme. Therefore proper adjustment is necessary, if not adjusted properly the paper will go into the printer wrongly.

Overloading paper

A tray should never be overloaded if the amount in your tray goes beyond the designated amount your printer will always jam.

Dirty printer

Paper dust and ink accumulation inside your printer always result to paper jams. Always ensure that your printer is clean.

Use of faulty circuits to power your circuit

It is advisable to power your print device from a dedicated circuit as it will help your print system maintain a constant level of energy thus avoiding paper jams.

Use of the wrong tray

Modern trays tend to have specific trays for special media thus in case you use the wrong tray it might lead to jamming of your papers.

Stack up in the tray area, It is always advisable to keep the output tray clear to prevent stack up.

Position

The irregular positioning of the sliding mechanism of your printer.

Mixed up sizes

Mixing the paper sizes can also lead to jamming.

Irregular dimensions

Use of irregular dimension papers can cause jamming.

 

Resetting Your Ink Cartridge Memory

Among the main problem that printer owners experience is the printer not recognizing a new ink or toner cartridge. This problem mainly occurs when changing or replacing an empty cartridge with a new one. Regardless of the brand of printer, you are using this problem tends to be universal for all printers.

Memory reset

Upon the installation of a new cartridge the printer should automatically recognize it, thus resetting its internal memory in turn, should display full ink and toner levels.  However, the printer just doesn’t do that as it may not have detected the current cartridge. In most cases a printer with such a kind of problem may show these messages:

  1. Toner is not compatible
  2. printer cartridge not detected or printer cannot detect ink
  3. it may show a low or empty level of ink and toner displayed on the desktop
  4. For an HP printer, it may display, ‘HP cartridges locked’ or Cartridge protection enabled
  5. Or it may show some flash warning lights on the printer’s display.

 

This can prove to be very frustrating since it not only stops you from printing but also can take much time if you don’t know what to do. However, by deleting the retained memory from the previous cartridge the printer is able to read the new one.

Below is a comprehensive procedure which can aid you in making your printer recognize the new cartridge.

Swap method

First, place the new/refilled ink cartridge into your printer for the purpose of recognition and make it print an alignment page. However, don’t worry if it still retains the memory of the previous cartridge and read the ink level it was before.

 

Remove the cartridge from the printer and replace it with an old one again, repeat the process.

 

It is worth noting that printers can retain the memory of 2 cartridges, this step should ‘trick’ the printer into forgetting the memory of the second one and recognizing the third one. Thus use two different ink cartridges for this purpose.

 

Reinstall the first /refilled cartridge and you will find that the printer now recognizes the new cartridge as full.

 

Tape method

Take your cartridge and tape over the left corner of the contact square later has it print an alignment page. Ignore any message about the printer having a problem.

 

Take the cartridge again this time however tape over the upper right corner put it back and make it print a second alignment page.

 

Finally, take it out and reinsert it but this time with no tape. Your printer will recognize the cartridge as full.

 

If the printer doesn’t still recognize the cartridge place the tape over the contact squares on the bottom of the cartridge and repeat the process.

 

 

3D Technology- The Good vs. The Bad

3D technology is here with us, with its immense ability this new technology has enabled anyone with access to some 3D printer and some good internet connection to summon anything they want into existence. Though 3D printing has always been there since 1984 it was never made available until early 2010. The technology better known as additive manufacturing is now within reach to both small and medium-sized business contrary to when it was reserved for the giant companies.

3D printing entails using a special printer to create some three-dimensional object from digital rendering where the successive layers of the material to be formed are laid down in different shapes. The process which has been useful in the fields of architecture, aerospace and even the automotive field tends to utilize foam, paper or sheet metal when printing.

For such a startling and amazing innovation the possibilities tend to be limitless, in its application this form of printing brings out both the good and bad side. Let’s look at some of them.

The good

With 3D printing one, there is faster manufacturing speed associated with it after the initial outlay. With 3D printing, a user is always able to design the object down to minute specifications.

Over the years the vast field of medicine has undergone some serious technological developments one of them being the art of 3D printing. With this technology, physicians can now manufacture customized body parts or organs via the replication of the human DNA. This, in turn, would solve the problem of organ donation.

3D printing is super eco-friendly. This is because this form of printing is referred to as additive manufacturing compared to the traditional subtractive manufacturing. When it comes to matters going green, 3D printing doesn’t require many systems or resources neither does it pollute the air.

The bad

Copyright infringement

3D printing has become more popular and less expensive; this often leads to people manufacturing objects whose designs belong to someone else. This will often to lead to more lawsuits in the chambers.

Fewer jobs

With 3D printing, it won’t be long before each and every household custom designing their own, be it shoes, clothes, and even household products. It may sound good, but what then happens to the industries and personnel who produce these services?

Unlawful /illegal items

Though most people would utilize 3D printing to enhance their lives there are those who tend to use this form of printing to manufacture illegal or harmful items for instance guns.

Size

The modern 3D printers can only produce small products, though there is immense progress in making bigger machines, for now, we have to stick with small sized 3D printed objects.

 

Facts You Never Knew About Remanufactured Ink Cartridges

Remanufactured ink cartridges better known as recycled ink cartridges are those ink cartridges made out of new and recycled components. This is done by remanufacturers who collect the empty ink cartridges clean and refill them while also replacing any parts that are damaged or not working properly. This finally gives these cartridges a better chance of working properly when inserted into a printer.

In this field of remanufacturing ink cartridges so many concepts have been misunderstood. Many people in the printing business tend to know very little about this process. Here are some things you probably never knew about remanufactured ink cartridges.

 

Go green

Did you know that when you purchase remanufactured ink cartridges you help in reducing environmental impact via shunning off the disposal of unnecessary metals and plastics? This is because the remanufacturer reuses the complete cartridge, for nature lovers and those who opt to go green recycled cartridges are the absolute option.

 

Optimal performance

Many people tend to think that recycled ink cartridges are just old refilled cartridges which is not,  remanufacturers are very skilful when making these cartridges, they not only inspect each cartridge but they also repair the same. All microchips are replaced to ensure optimal performance of the cartridge while a test is run to ensure complete functionality before letting the product hit the shelves. Basically remanufactured cartridges are a lot better and more reliable than those customers refill themselves.

 

Customized ink

Contrary to the perception out there remanufacturing companies don’t reuse old ink and toner. This is because the ink and toner tend to be contaminated during the printing process, therefore, remanufacturers make their own ink which is tailored to that specific brand and printer. Printer ink is thus neither combined nor recycled.

Remanufactured ink cartridges tend to be of optimal performance. Lyra Research, Inc a Boston based research firm did some research where they concluded that almost 80% of the firms that switched to remanufactured cartridges found them to be of equal or better performance than original equipment manufacturer cartridges.

 

Remanufactured cartridges warranty issues

Basically, this tends to be a scare tactic, this is because using compatible ink cartridges cannot legally void your warranty. It is also of great importance to deal with reputable re-manufacturers who will provide you with a full warranty of your product. This can cater for any unusual circumstances.

Did you also know that, for instance, did you know that remanufactured ink cartridges are copyright protected and thus cannot be replicated by another manufacturer?

 

The best thing about remanufactured ink cartridge is that you can purchase from the comfort of your home. Inktoner store is committed to offering you the best deals online, visit our site today and get to see cutting-edge ink cartridges at some awesome prices.